J Jonah952 New Member Jun 23, 2015 #1 I have this code coming up on my disco 2 high speed crank sync lost fault td5 anybody help fix it ive chnges the crank shaft sensor
I have this code coming up on my disco 2 high speed crank sync lost fault td5 anybody help fix it ive chnges the crank shaft sensor
fanatic RESPECT IS EARNED, BEATINGS ARE FREE ;-) Forum Sponsor Jun 23, 2015 #2 Check wiring loom at sensor and ecu end as they snap also starter interference has been known
sierrafery Well-Known Member Jun 23, 2015 #3 Also check for oil in the ECM red plug cos oil ingress can act as insulator and the signal is alternative... the starter should not interfere with the high speed signal cos it's from above idle speed.
Also check for oil in the ECM red plug cos oil ingress can act as insulator and the signal is alternative... the starter should not interfere with the high speed signal cos it's from above idle speed.
