Z

Zoe Pitters

Member

• Dec 14, 2017

• #1

Hi my p38 range diesel has engine disabled tried wma code with no joy could it be due to abs fault. Key remote not worked but never been a problem b4 it flashes but does not do cental locking. I' at loss. Any ideas please x

 

Wazzajnr

Well-Known Member

• Dec 14, 2017

• #2

Nothing to do with abs, it needs the eka code entering.
If it won't enter by following the method in the book to the letter then the cdl microswitch in the lock pack could be faulty.

 

mozz smith

Well-Known Member

• Dec 14, 2017

• #3

hi zoe, please see your messages , regards mozz

 

Z

Zoe Pitters

Member

• Dec 15, 2017

• #4

mozz smith said:

hi zoe, please see your messages , regards mozz

Click to expand...

Thanks mozz gonna bell u tomorrow x

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

• Dec 15, 2017

• #5

If Mozz cannot help then it will require a syncmate or similar to get it going.

Don't know of any members with diesel diag near Romford though.

 

wammers

No longer with us, RIP

Donater

• Dec 16, 2017

• #6

Grrrrrr said:

If Mozz cannot help then it will require a syncmate or similar to get it going.

Don't know of any members with diesel diag near Romford though.

Click to expand...

Syncmate cannot clear "Engine disabled" message on dash, that requires EKA code. Fob cannot be synced until correct EKA has been entered and accepted.

 

mozz smith

Well-Known Member

• Dec 16, 2017

• #7

thanks wammers , I already have someone nr Romford who has a syncmate , at moment need to check if brand new battery is fully charged ??? then keep re-trying eka code imput ,,,, will persevere , hope to find nanocom local ... cheers wam ...mozz

 

Z

Zoe Pitters

Member

• Dec 17, 2017

• #8

mozz smith said:

thanks wammers , I already have someone nr Romford who has a syncmate , at moment need to check if brand new battery is fully charged ??? then keep re-trying eka code imput ,,,, will persevere , hope to find nanocom local ... cheers wam ...mozz

Click to expand...

Thanks for all your help mozz, just waiting to get lock micro switch checked as lights sometimes don't flash when putting in eka code x

 

brianp38dse

Well-Known Member

• Dec 18, 2017

• #9

Here is a test sheet for the lock that martyuk put together if its of any help.

 

Attachments

• P38 Door Latch Tests.pdf

  90.3 KB · Views: 181