M

max1960

New Member

• Mar 22, 2011

• #1

hi guys recently bought freelander 1.8i needs new cv joint offside rear any how to vids available or any instruction would be greatly appreciated.

 

mjrimmer

Active Member

• Mar 22, 2011

• #2

Download rave and buy yourself the haynes manual.....your going to need them both sooner or later and the haynes will take you through how to do this.
Also your going to need a torque wrench that goes upto 300ftlbs for replacing the driveshaft nut.:welcome2:

 

2

2001ytd4

Banned

• Mar 22, 2011

• #3

Its 400ftlbs on a td4 ?

Cv joints are not to bad to change if you have decent mechanical skills. I bought a set off the net for around £20 each. Quality parts too. I will post he website when im near my pc.

 

Last edited: Mar 22, 2011

mjrimmer

Active Member

• Mar 22, 2011

• #4

No its 295 lbf ft or 400nm

you can get the outer cv joints £20 ish no problem if it's an inner your looking at £170 ish for the cv or £350 for a new driveshaft as you can only get them from a main stealer for the later td4 ones but I don't know about the earlier ones

 

Last edited: Mar 22, 2011

M

max1960

New Member

• Mar 23, 2011

• #5

cheers guys, managed to down load rave great help now know what Iam doing .Will post if I get stuck. Many thanks to you all