Landy_Ben

Active Member
HI
new here, just going through the process of trying to find a Defender 1990 - 1999 with a 200 or 300 TDI engine. Harder than it looks and seems like you have to be quick off the block ...
 
HI
new here, just going through the process of trying to find a Defender 1990 - 1999 with a 200 or 300 TDI engine. Harder than it looks and seems like you have to be quick off the block ...
Hi Ben, welcome.

Not hard at all, just depends on your budget.
 
Welcome to the forum
I7pha4t.jpg
 
Defender prices are high now. That’s why I chose P38A for my current victim. Much comfier and cheaper than my old 300TDI 90.

Welcome to LandyZone :)
 
Paid 10k for a (nice, not great) 98 300tdi 90 CSW in 2017.
Was from a dealer and, admittedly, I was rash.
Look hard and long and jen up on what to look for. Loads of trash with a bit of flash out there.
Where you at? Bit of local knowledge might help. Good hunting and welcome to the Zone.

Edit
Was Walton Motors up Guildford way. They usually have half a dozen or so you could poke around and get a feel for what you like. Your budget won't go far though.
 
Last edited:
Do not go to Walton motors we have heard a lot of bad press about then, i went to them and was not impressed with there motors or attitude
i believe there is a thread about them on here.
 

Similar threads