V

v6ken

Member

• Oct 14, 2015

• #1

got a problem with me landy, it just keeps getting hotter and hotter when I take it for a good run, just done the heads, there holding pressure, its like the water is not cooling down or not getting back to the block cool, any 1 got any advice, thanks.

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Oct 14, 2015

• #2

Cracked liner or head perhaps

Have you checked the water pump as impeller if plastic break up

 

V

v6ken

Member

• Oct 14, 2015

• #3

fanatic said:

Cracked liner or head perhaps d

Have you checked the water pump as impeller if plastic break up

Click to expand...

heads done, pump done, belts done, bottle and cap done, holds pressure, just boils up.

 

V

v6ken

Member

• Oct 14, 2015

• #4

heads done, pump done, belts done, bottle and cap done, holds pressure, just boils up.

 

V

v6ken

Member

• Oct 14, 2015

• #5

if a cracked liner it wud drop the water into the oil, or if the head or heads were letting exhaust fumes up in to the water it wud pressure up then over, this runs fine on short runs but on longer ones it boils, am thinking its got a good air lock, after doing a google .

 

V

v6ken

Member

• Oct 14, 2015

• #6

v6ken said:

heads done, pump done, belts done, bottle and cap done, holds pressure, just boils up.

Click to expand...

 

V

v6ken

Member

• Oct 14, 2015

• #7

v6ken said:

heads done, pump done, belts done, bottle and cap done, holds pressure, just boils up.

Click to expand...

v6ken said:

heads done, pump done, belts done, bottle and cap done, holds pressure, just boils up.

Click to expand...

fanatic said:

Cracked liner or head perhaps

Have you checked the water pump as impeller if plastic break up

Click to expand...

all new, heads r done, am thinking its got a good air lock, b4 the heads went it took took the caravan to torquay and back, then done heads , belts, pump, bottle, cap, now it just boils the water away on a 10 mile run, it was ok b4 I done the heads.

 

v8geoff

Well-Known Member

• Oct 15, 2015

• #8

Hello and welcome