Jimmy1234

New Member
Hi all I'm new to the forum thing so bare with me if I post all over the place still working stuff out below I have a problem that someone may be able to help with cheeeeeers

Rear light cluster problem both


  1. Hi All,
    I have a disco 1 1997 which I have all but completed, when I put the rear light units in they are not working , I.e. Rear fogs stop and tail, but the reversing lights work ok, the rear tail lights and indicators in the bumper work fine. On investigation there is power getting to the cluster hence the working reverse lights. The rear eye level brake light also works.
    I took the panel off at the back o/s and found there is a green and brown wire coming downwards that is not connected but can't see where it has come from, and a black wire that is not connected, when I stripped it down a year ago everything was working and there was a few random wires which had been chock blocked in, stupidly I must of cut them out thinking I would remember, I don't and now I'm completely stuck.
    Can anyone help me as I want to get mot done but can't until this is sorted

    Regards

    jim
 
Welcome. Not familiar with the wiring of the Discovery because I don't have one. You might try posting a question in the Discovery section too, so all the knowledgeable people in there might see it
 

Similar threads