jemj
Member
Hi all, finally got what i thought was a decent condition 1995 DSE with reported fault of left blend motor sticking. Car drives great just need to sort out problem. Hevac control shows book and exclamation mark as expected. I borrowed a good tested set of blend motors from a mate who took them off one of his cars for me (working on his car) but when plugged into mine (not fitted just plugged in) display stays the same. Then started looking deeper into problem. I metered potentiometers on my units and borrowed units at plug whilst powering up motors with 9volt supply end to end and back again all were very close to each other so can only conclude that they are good. I have tried to get a reading on the motor supply wires without success so now suspect the controller to be at fault although all lights operate on switches when operated including fan speed. I don't have RAVE or test equipment but when checking fuses/relays I can smell burning so my next question for all you guru's out there is, can a faulty fuse box cause the fault that I have?
Thanks in advance
Dean
Thanks in advance
Dean