Leebastard
Active Member
took it to MOTEST in Hemel. as i pulled up the fella said, "i don't know if i have enough ink in my pen for this one" i asked if he said that to his wife. after that he was cool haha
jai_landrover
Well-Known Member
Not that it would have passed but give the old dairy garage a try in Tring they're really really good and they know landies.
Defenderdog1
Active Member
What headlight's have you got in your series lee said you had led ones, the only led ones I can find are around the £800 mark?
jai_landrover
Well-Known Member
Weather stops play today
Spyderman
New Member
Headlights are the HID upgrade ones, Sidelights, indicators, rear lights, work lights and spots are LED are seriously bright and totally waterproof.
Defenderdog1
Active Member
Nice one monkey.
jai_landrover
Well-Known Member
Freezing just got in from workin on the 80 inch........
Any news from Spyderman I bet he is having some fun in the Mud
Any news from Spyderman I bet he is having some fun in the Mud
jai_landrover
Well-Known Member
Took me 30 mins to write that Lol
Defenderdog1
Active Member
Looked at them thought they where just upgraded bulbs and a converter, I keep getting water in the headlights what company did you get them from and are they fully waterproof, cheers.
Spyderman
New Member
Bought the headlights from Paddocks and used loads of silicone where the glass meets the reflector, that's where they leak, so far no leaks despite being immersed several times.
LED lights from bolt on bits
Spyderman
New Member
Very wet and extremely slippery, ended up in all sorts of holes, winch had some serious use, together with waffles and ground anchor. Rescuing myself and everyone else. Loads of the old tracks are now passable since the repair work has been done, makes it a lot better knowing that you've got a chance of getting through whereas before you didn't have a hope no matter what you were driving
Hi again. I posted a week ago introducing myself since I've moved to Ware and about an oil leak. Turned out to be just a loose hose coming off the cooler, so an easy fix with tightening the clip.
Now this over the weekend. I heard what sounded to be a belt making a noise. I checked and saw this bolt was very loose. I tried tightening it, but it seemed to get to a point and just spin (not all the way in). After another short drive, it was loose again.
Any tips? Is this normal to loosen up and should there be a nut on the back to hold it on that could have fallen off?
Thanks again for the help
Now this over the weekend. I heard what sounded to be a belt making a noise. I checked and saw this bolt was very loose. I tried tightening it, but it seemed to get to a point and just spin (not all the way in). After another short drive, it was loose again.
Any tips? Is this normal to loosen up and should there be a nut on the back to hold it on that could have fallen off?
Thanks again for the help
Attachments
jai_landrover
Well-Known Member
NJ
What engine which belt ??
What engine which belt ??
jai_landrover
Well-Known Member
Sorry never saw the pics
jai_landrover
Well-Known Member
Bottom alt bracket looks like there should be a nut behind. To tension the alt belt you need to loosen the bolt on the bottom rhs of alt the bit on the other end of the bracket to the bolt. tension and then re tighten. But only do this after you have the bolt you show that is hanging out is back in.
Can't remember if the bracket is threaded but I would guess its not and it should have a nut behind it
Can't remember if the bracket is threaded but I would guess its not and it should have a nut behind it
jai_landrover
Well-Known Member
P.s it will never go I at that angle make sure it goes I straight it may well be threaded but needs to be straight.
