Light pod woo this is just a dry fit it needs taking off to put the rubber on and bolts the front need tightening

41dff0a693fb7d12fac4798e530c75fe.jpg


99531ed43dba233ea349fae372171f84.jpg
 
Not a happy bunny go outside to bolt the seats in and it's starts ****ing it down so I'm now sat in the car looking like

7c040aca82e1d942ee93a7166ed4f4e7.jpg
 
Carpet makes a good headlining and looks tidy. Stuck mine on with thixofix, pricey but does the job well, better than evostick
 
hens, any news yet what happening there mate? I hope the female sex is in the way COZ that just ain't on mate. LOL

shame your not up this way I would help out and even have the beeeers:pop2::5bcheers2: :5bcheers2: :5b :5brant: there too!!
 
Last edited:
hens, any news yet what happening there mate? I hope the female sex is in the way COZ that just ain't on mate. LOL

shame your not up this way I would help out and even have the beeeers:pop2::5bcheers2: :5bcheers2: :5b :5brant: there too!!
Not really anything else happening this side of Christmas just work work work to get some money together
 
Update woo well a small one

4436cea5c7893e2337f3cbb45c34a820.jpg
steering wheel mods no bus type wheel no more and feels just the right size not to hard to turn might be harder when moving but oh well only done it as it was quick and easy and had nothing to do after college
 
I dont lke little steering wheels in a series, you dont get as much leverage. I remember once when going off roading, a guy had a series 2 with big tyres and a small wheel and he really struggled to turn the thing
 
I dont lke little steering wheels in a series, you dont get as much leverage. I remember once when going off roading, a guy had a series 2 with big tyres and a small wheel and he really struggled to turn the thing
That's one thing I worried about but slowly collecting bits for a pas setup so that should be going on after its all up and running but it makes it so much easier to get in and out also my tyre aren't that wide glad I didn't stick to the 31s or 33s like I planed and went 265/75s
 
Should be alright with PAS. Theres a few threads on here about fitting the PAS from a P38 to a series
 

Similar threads