M

moterfix2007

New Member

• Aug 16, 2011

• #1

Hi I have just joined so i Am new to this, but i have just bought a wrap round nudge bar and light guards but have no instructions or templates to fit any of them, is there anyone on here who knows and can help me.
thanks Pat
ps forgot to say it is for a p38 thanks again

 

Last edited: Aug 16, 2011

wammers

No longer with us, RIP

Donater

• Aug 16, 2011

• #2

If they are genuine items look a RAVE accessory fitting instructions. If not you will have to wing it.

 

C

clarkie

Active Member

• Aug 16, 2011

• #3

puting your location in your profile may help as there might be someone around the corner who can help fit it or show you how theirs fits

 

M

moterfix2007

New Member

• Aug 18, 2011

• #4

Thanks for help with this matter but i still have'nt been able to get any instructuion but I will keep at it, thanks again Pat from Sheffield.

 

C

clarkie

Active Member

• Aug 18, 2011

• #5

try offering it up to the car to get an idea of where it bolts to and if you gotta do any cutting of bodywork like on some classics,never fitted one to a p38 cause they look fugly

 

A

Andy_J

Active Member

• Aug 18, 2011

• #6

Not sure how to do the light guards, but for the nudge bar you need to remove the bumper.

Assuming you have the proper brackets for the nudge you need to remove the bumper (2 bolts on the underside and 2 white clips in the wheel arches) once you have the bumper off, you need to attach the brackets to the back of the bumper. Refit the bumper and bolt on the nudge bar. you should have 2 spacers and longer bolts for the bottom securing holes on the nudge bar as these replace the 2 securing bolts for the bumper.

hope this helps for the nudge bar

Andy