Hello everyone, I need help sorting a violent shake after pulling off in 1st and clutching for second gear. I recently did a full engine overhaul to my 200tdi....seals, belts, gaskets...everything done to specs but now when I pull of in 1st gear ( lt77 ) and I clutch for 2nd I get a violent shake from the engine and it sounds as if it's going to cut off but after going a bit everything starts working fine. The only thing that was not done to spec was tightening the crank bolt to 260ft pounds. I tightened to 220 and then used a regular ratchet and tightened a little more
Any help will be appreciated
Any help will be appreciated