might want to just check 100%

one push drivers door unlocks
two pushes the rest unlock

once you've got all the doors unlocked (use switch on dash if you have to) then

one push, all doors should lock.

if the passenger locks but won't unlock, usually failed solenoid in lock assembly, simpler to just replace whole thing.

tailgate is a different arrangement. sometimes, the lock mech gets out of synch, you can check this with the tailgate open and turning the lock mech over with a screwdriver, first one notch then two. don't forget to operate the handle to reset it before trying to close it.

good luck
 
things that are not working are . back door , back window , central locking , have checked all the relays and thay are ok.
 
What happens when you use the switches inside the car for the central locking and tailgate window?

Is it a 3 door or 5 door?

Does central locking work off the key in the drivers door?

Where are you located?
 
Do the doors lock? Do they unlock? Is there a noise from the motors when you try to lock or unlock?

If you can explain in as much detail what is or isn't happening we may be able to help.

Unfortunately just saying the door doesn't work isn't a lot of use!
 
pressing the switch inside nothing happens , its a 5 door , remote not working ..i have to lock each door from the inside then lock the drivers with the key .switchs for tailgate not working . can not think of what it is .
 
if i change the ccu at the back of the fusebox will it have to be paired to the ecu .i think I'm getting over my head here but land rover charge £450 for a ccu but on e bay its £40 so have to give it a go .
 
thanks for all your help got cci off e bay for £27 10 mins to fit and back not life apart from the remote locking will have to get it coded .
 

Similar threads