D

deanwilko

Member
hi having a bit of trouble setting up the high and low on the transfer box, all it does is just jump back out nomatter where i set the linkage up. also i am strugling to get a clutch after replacing it, i have also replaced the slave, master cylinder and damper but cant get a decent pedal.
 
pedal will take time ,leave wieght on pedal over night,how are you adjusting it ,on the splines or adjuster nuts near t/box
 
hi im adjusting it on the splines, is there a way to adjust it on the nuts. it will engage high/low then just pops back out then you let go

thanks dean
 
it pops out of both ?in that you have enough movement both ways on lever but cant fully select either,all bushes in linkage there,can you select either by using molegrips on lever coming out of transfer box ,you are turning one prop to align dog clutch to engage properly
?
 
yes pops out of both was working fine until replaced the clutch, all bushes are there not tried turning one prop to align the dog clutch.
 
feels like its selecting all high/low on t/box now, will wedge the jack handle so its slightly depressing the clutch pedal overnight and try it in the morning.

thanks for your help james
 
You must log in or register to reply here.

Similar threads

S
Hi/low switch
Replies
8
Views
413
Shore968
S
D
Discovery 2 pre facelift Clutch pipe?
Replies
5
Views
324
Descapri
D
Seaswood
Shifting into reverse & high low transfer case.
Replies
10
Views
1K
Seaswood
Seaswood
MULDERKE
Freelander 1 Sad Tidings. And many Thanks.
Replies
6
Views
757
WhiskyLassie
WhiskyLassie
D
Lost high range gear in transfer box??i
Replies
11
Views
902
steve2286w
steve2286w