Z

zidane

New Member
Ok I'm a bit slow, I've looked in the dealers hand book and Haynes Manual but can't find the answer, so i hope someone on here will help me

The question is , how much water does it take to fill the cooling system, and should i mix it with the coolant/anti freeze before i put it in. :confused:

Thanks in advance.
 
i think its 6 ltrs what i normally do if i don't know the volume is get a cheap watering can 1/2 fill it with coolant and top it off with warm water then fill yer system if yer need more do it again (with less in the can tho) and if yer have too much stick it in a bottle and keep it in the motor with pre-mixed coolant written on the bottle
 
Ere Gspot you still after a rad??? I have the one outta me 110 available if ya needs one
 
i think i am gonna use the series rad and a separate oil cooler, and a bunch of gauges to monitor boost pressure, coolant temp, oil temp and oil pressure
 
G-man said:
i think its 6 ltrs what i normally do if i don't know the volume is get a cheap watering can 1/2 fill it with coolant and top it off with warm water then fill yer system if yer need more do it again (with less in the can tho) and if yer have too much stick it in a bottle and keep it in the motor with pre-mixed coolant written on the bottle
Click to expand...

cheers will do that tomorrow.:)
 
i'm sure any motorist retailer can tell you the type, quantity and % of antifreeze you need just from the reg number!
 
gavbriggs said:
i'm sure any motorist retailer can tell you the type, quantity and % of antifreeze you need just from the reg number!
Click to expand...

Thanks..
The % ratio to water is in the dealers guide book, i needed to know the volume of water it would take to fill the system, so i can mix it right. ( mix 50-60% Anti freeze/coolant).
so it's, ie a 6ltr tank = 3 ltrs of anti freeze + 3 ltr of water. as i see it.
looks like ill need an other bottle of it.
:cool:
 
zidane said:
Ok I'm a bit slow, I've looked in the dealers hand book and Haynes Manual but can't find the answer, so i hope someone on here will help me

The question is , how much water does it take to fill the cooling system, and should i mix it with the coolant/anti freeze before i put it in. :confused:

Thanks in advance.
Click to expand...

just remember never never drip any water over the doors
 
You must log in or register to reply here.

Similar threads

I
L322 Could anyone help with 2005 RR HSE fluids questions?
Replies
0
Views
561
invisible999
I
M
Pressure in coolant
Replies
2
Views
383
biketeacherdave
biketeacherdave
M
1992 200tdi 90 2.5 Body Parts Catalogue
Replies
5
Views
385
Mepps
M
spacebrodie
AI and Workshop Manual
Replies
7
Views
303
pwood999
pwood999
B
Mistake with coolant flush?
Replies
11
Views
614
Bellhouse
B