ifloochies
Well-Known Member
Hi there,
So after years and years of service, the AC on the disco failed to blow cold for the first time when needed.
Put a gauge on it, and the system had lost a third of the volume of refrigerant, checked for leaks and it turns out its the evaporator behind the dash that's had it. So I need help in identifying the securing points for the dash so I can take it out and have the evaporator replaced. Secondly, can anyone confirm if the evaporator from the D1 is the same as was used in the D2. Asking because I already have a replacement evaporator for a D1 in the shop, and it looks like the blower motor and heater controls are the same between the two models so just wondering if it would fit.
Would appreciate any inputs. Thanks.
So after years and years of service, the AC on the disco failed to blow cold for the first time when needed.
Put a gauge on it, and the system had lost a third of the volume of refrigerant, checked for leaks and it turns out its the evaporator behind the dash that's had it. So I need help in identifying the securing points for the dash so I can take it out and have the evaporator replaced. Secondly, can anyone confirm if the evaporator from the D1 is the same as was used in the D2. Asking because I already have a replacement evaporator for a D1 in the shop, and it looks like the blower motor and heater controls are the same between the two models so just wondering if it would fit.
Would appreciate any inputs. Thanks.