I have a 1988 Land Rover 90 2.5TD. I am concerned that my exhaust is not right. The back box appears to be too low. I have looked today to see if there is any adjustment but everything seems to be where it should be. I have checked the part number on the back box and it is correct. I would appreciate if anyone with a similar vehicle could post pics of their exhaust so I can see where it should run. Strange request I know but I'm running out of ideas!!
Pikey
Dummy Ejection Facilitator..
Come round to mine and you can have a look for your self. I'm in Hull myself.
Don't forget to take a bottle or 3
TheVengefulElephant
Well-Known Member
That does look very low. I'll see what its like on my 110 at about half four when I get home.
yup - go see Pikey.:bolt:
ratty
I'm not special I'm limited edition
Dunno about the 90, But on a 110 their is a support bracket AFTER the back box and welded to the actual tail pipe. If it is meant to have one and is missing it will cause it to hang low.
discomania
Well-Known Member
I think the whole thing needs twisted from the mid section to get the back box to come up a bit.
If you undo the three bolts a bit and get it slack enough the exhaust will spin with the clamps in place and allow you to twist the whole thing and get it to sit up a little, I had this issue when i took it off to drop the gearbox a few years back.
If you undo the three bolts a bit and get it slack enough the exhaust will spin with the clamps in place and allow you to twist the whole thing and get it to sit up a little, I had this issue when i took it off to drop the gearbox a few years back.
