I did all that in the first place. I think he'll be behind the side trim panels but there's no way of getting them off that I can see. There's water and a dead mouse waiting for him and I've now taken out the 2 little trays above the wheel hubs so he can actually get out of there... 48 hours and countingPlay some barry manilow and he'll be out in no time. Ask marmaduke if you don't have any.
Yer profile says Freelander 2. The spare wheel if fitted lives under a large lift out panel inside the car, under the boot space. Lift the panel out and have a look.
Is that possible though - if doors and windows are closed?He's maybe wriggled out of this one.
Is that possible though - if doors and windows are closed?
Oi chicks love a bit of BazzaPlay some barry manilow and he'll be out in no time. Ask marmaduke if you don't have any.
Yer profile says Freelander 2. The spare wheel if fitted lives under a large lift out panel inside the car, under the boot space. Lift the panel out and have a look.
I appreciate as a Freelander driver you're a bit more into Jimmy Somerville.... Your life story awaits
I was on about Hippo or has he had the op?Doubt it, I think she is female.
I was on about Hippo or has he had the op?
Read the post in the link below by dunroof. There's a few things to undo, then pull the trim and the push fit plugs will come out.I did all that in the first place. I think he'll be behind the side trim panels but there's no way of getting them off that I can see. There's water and a dead mouse waiting for him and I've now taken out the 2 little trays above the wheel hubs so he can actually get out of there... 48 hours and counting
We have one of those but it was an unfortunate series of events (created by the owner of the snake!) which led to his unplanned presence in the car in the first place it won't be happening again - although I'm sure this isn't the last time we will have to go snake hunting!Good result, pleased you have recovered your reptile in good condition!
Just a thought, but would a tank with a tight fitting mesh lid for travelling relieve the workload on little sis?