C

Crofty

Member
Looking for some advice/ guidance, I've had to replace my front oil seal due to it leaking (MOT fail) at the same time I've put another new timing belt on, everything seems to line up well the problem is she won't even fire when I spin her over! I've checked I'm getting fuel all the way to the injectors so what's the problem? Or am I missing something simple?

Thanks in advance
Crofty.
 
Crofty said:
Looking for some advice/ guidance, I've had to replace my front oil seal due to it leaking (MOT fail) at the same time I've put another new timing belt on, everything seems to line up well the problem is she won't even fire when I spin her over! I've checked I'm getting fuel all the way to the injectors so what's the problem? Or am I missing something simple?

Thanks in advance
Crofty.
Click to expand...

Depends how you changed the timing belt.
 
Standard way. Put pins in fly wheel and pump, stripped down replaced seal, new pulleys new belt, had to loosen 3 bolts on pump, belt on tension up pop pins out manually turned it over 3 times, rechecked the marks then spun by key.
Not starting.
 
If you removed the FIP stop solenoid wire on the back of the pump for safety reasons have you forgot to refit it?

If the flywheel was locked with pin, and so was the FIP. Did you check the marking on the cam gear lined up with the marking on the casing?
 
ONE LIFE LIVE IT. D90 said:
If you removed the FIP stop solenoid wire on the back of the pump for safety reasons have you forgot to refit it?

If the flywheel was locked with pin, and so was the FIP. Did you check the marking on the cam gear lined up with the marking on the casing?
Click to expand...
I didn't remove the solenoid wire, and all points lined up.
 
Crofty said:
All points were lined up with pins reinserted and I always turn over by hand first with 3 full rotations.
Click to expand...
its 2 rotations if you want to check pins/marks realign fully again, 3 would mean you start or end up 180 degrees out
 
Thanks for tips guys, have resolved it by completely stripping again resetting marks and presto started first turn.
 
You must log in or register to reply here.

Similar threads

F
250k miles, help with engine health checks/diagnosing
2
Replies
26
Views
751
currymunster
currymunster
C
2.5 Petrol Timing
Replies
4
Views
424
styleruk
styleruk
AH-4x4
Steering Box Leaks (NTC1582)
Replies
7
Views
377
Rangieman123
Rangieman123
mickyp
Hi Guys, new here, just become a landy owner.
Replies
9
Views
580
mickyp
mickyp
AH-4x4
Help ending my leak - 200TDI
Replies
10
Views
483
AH-4x4
AH-4x4