Stumpy 1970
New Member
Hell. Not exactly the bringers of good news are you!
There must be someone out there that can help
Me!
There must be someone out there that can help
Me!
for taking chassis bushes out ?
Stumpy 1970
New Member
What about getting my nearest tyre barrage to use their impact guns to loosen them. Would that work?
oxides
Well-Known Member
It's a landy - anything's worth a try. Personally I'm a firm believer in a breaker bar and four foot of scaffold pole. Something has to give......
The last time I did springs I had to do it the hard way - hacksaw through the bolts and bushes.
3.5 efi
Well-Known Member
keep applying penetrating fluid and try again next weekend or use a 1 mm cutting disc in a 4 and a half inch grinder, my favourite tool
please feel free to edit
pornstarmax
Active Member
I ended out cutting off threaded bit sticking out then grinding it whole lot back untill there was nothing left.
Took about 20 mins - no pretty - but effective.
Have you sorted it yet? PM if you need help..... I an in North hants alot.
Took about 20 mins - no pretty - but effective.
Have you sorted it yet? PM if you need help..... I an in North hants alot.
pornstarmax
Active Member
Oh worth doing 2" shacs makes a big difference - drives much better - be careful - hope your drive shafts are in good shape - I found vibration can be exagerated!!!! Then again my original ones where properly ****ed...
Stumpy 1970
New Member
Still not ha another crack at the yet as been working. I've given them a good dousing of WD40 and will keep spraying it on and plan to have another go after boxing day.
I might very well take you up on the offer.
Many thanks.
I might very well take you up on the offer.
Many thanks.
