I have recently put the 3.9 efi in my 1988 defender 90 but am struggling to wire it up? I have got the existing loom for starter, coil, alternator and oil. this is all working fine as you would expect but for the efi loom I dont really know what to do? I have tried following the instructions from here for other peoples problems but the colour wires are different as they refer to a rrc my engine came out of a disco 94, with air con immobliser and all the gubbins so have a lot of wire that look like spegtti junction lol. someone said that the injectors work off a SWITCHED GROUND NOT LIVE is this true and does anyone know the bare min wires i need to connect to kick her into life. I have fuel pump working coil working starter working. i have cranked it over but no fuel getting to plugs???????
I will be very gratefull of any advise given and pics will be a huge help.:doh:

what ECU do you have The Lucas 14CU 'hot wire' airmass system OR the earlier 'moving flap' airflow system 4CU ECU.

its the hot wire system but i have kicked her into life now.

try Rover 14CUX Hot Wire Mass Flow EFI: Service and Troubleshooting may have info you require

mystery said:

what ECU do you have The Lucas 14CU 'hot wire' airmass system OR the earlier 'moving flap' airflow system 4CU ECU.

Click to expand...

i am having the exact same problem no power it the injects what could this be please