dennersten · Aug 26, 2015

I have a SIII, 88', 1973

I need the full kit, 1,2, 3,4,5,6,14,15,16
And i guess it's a left and right version of this?

And i need two of nr 6 on this sketch. I guess it's the same, left and right?

jamesmartin · Aug 26, 2015

have a look through this
http://www.landroverweb.com/Pdf-files/Manuals/Land_Rover_Series_Part_Catalogue.zip

dennersten · Aug 26, 2015

jamesmartin said:
have a look through this
http://www.landroverweb.com/Pdf-files/Manuals/Land_Rover_Series_Part_Catalogue.zip

The pictures are from that manual. No Numbers on that items of some strange reason

jamesmartin · Aug 26, 2015

there is when i look

John S · Aug 27, 2015

Assuming your landy is R/H drive, here goes:

1.&2. MRC6081(R), MRC6082 (L)
3. SH106161L (Qty 7) Metric
4.MRC5529 (7) Metric
5. WL106001L (7) Metric
6. WL106041L (7) Metric
14. 303750 (6)
15 WP8019L (6)
16 79246 (6)

All in Scetion 2G, page 08 of parts catalogue.

Hope you can get hold of 1&2, all the rest are really just std bolts nuts, washers and fastners. Good luck.

ajb403 · Aug 28, 2015

Near side mudshield, off side mudshield (if this has gone you'll probably also want the steering box cover), headlight bezel/surround. I haven't bothered with any of the fixings, just nuts, bolts, washers etc.

When you fit your mudshields space the bottom edge where it attaches to the footwell away from the footwell with either a nut or a load of penny washers to allow any debris that falls in there to come out instead of sitting in there and slowly rotting out your footwell. Hope that makes sense?

dennersten · Sep 1, 2015

John S said:
Assuming your landy is R/H drive, here goes:

1.&2. MRC6081(R), MRC6082 (L)
3. SH106161L (Qty 7) Metric
4.MRC5529 (7) Metric
5. WL106001L (7) Metric
6. WL106041L (7) Metric
14. 303750 (6)
15 WP8019L (6)
16 79246 (6)

All in Scetion 2G, page 08 of parts catalogue.

Hope you can get hold of 1&2, all the rest are really just std bolts nuts, washers and fastners. Good luck.

Wow. Great thanks! They are really not in my book. It must be another edition or something. Thanks again!

dennersten · Sep 1, 2015

ajb403 said:
Near side mudshield, off side mudshield (if this has gone you'll probably also want the steering box cover), headlight bezel/surround. I haven't bothered with any of the fixings, just nuts, bolts, washers etc.

When you fit your mudshields space the bottom edge where it attaches to the footwell away from the footwell with either a nut or a load of penny washers to allow any debris that falls in there to come out instead of sitting in there and slowly rotting out your footwell. Hope that makes sense?

Great thanks! Will do that!

dennersten

Member

jamesmartin

Well-Known Member

dennersten

Member

jamesmartin

Well-Known Member

John S

Well-Known Member

ajb403

Active Member

dennersten

Member

dennersten

Member

Similar threads