LandRoverDefender

New Member

• Jan 17, 2013

• #1

Basically i'm replacing the heater matrix, the fans ok, but only blows cold air, it starts off hot mind you but then goes cold. Anyway, managed to get it all detached etc but cannot figure out how to get inside the box it is stored in to change the heater itself, here are some photo's to show what i mean so if anyone knows what to do it would be greatly appreciated

 

Attachments

• 
  IMG_0610.JPG

  297.7 KB · Views: 540
• 
  IMG_0611.JPG

  322.1 KB · Views: 624
• 
  IMG_0612.JPG

  346.9 KB · Views: 384

big si

Well-Known Member

• Jan 17, 2013

• #2

drill out the rivets mate and remove the top cover over the matrix.

 

LandRoverDefender

New Member

• Jan 17, 2013

• #3

big si said:

drill out the rivets mate and remove the top cover over the matrix.

Click to expand...

How would i re-attach it?

 

big si

Well-Known Member

• Jan 17, 2013

• #4

LandRoverDefender said:

How would i re-attach it?

Click to expand...

really?... with a rivet gun of course

 

LandRoverDefender

New Member

• Jan 17, 2013

• #5

Ah yes of course, mechanics isn't my strong point, if it was i could of figured that out myself. I have a basic knowledge

 

big si

Well-Known Member

• Jan 17, 2013

• #6

LandRoverDefender said:

Ah yes of course, mechanics isn't my strong point, if it was i could of figured that out myself. I have a basic knowledge

Click to expand...

no worries now get on over to the introduce yerself bit before you go any further mate, folks will be far more helpful once you do:welcome2:

 

LandRoverDefender

New Member

• Jan 17, 2013

• #7

Yeah will do