I

Insane Drifter

New Member

• Sep 28, 2006

• #1

Hello can anyone help me, my key fob has broken , i bought another one but it doesnt work and the alarm goes off every time i open a door . Does anybody know how to get this fob to work with my disco? Im starting to worry my neighbours may hang me from the nearest lamppost!!!!

 

Gareth Coe

New Member

• Sep 28, 2006

• #2

No idea - perhaps you should post this question down in the Disco section. Someone down in there should be able to help you

 

Spyderman

New Member

• Sep 29, 2006

• #3

Have you been near a mobile phone mast? my key was wiped out by one. you can reprogram the system by entering the code using the key in the ignition barrel, turning it a set number of times in each direction. it should tell you how to do it in the handbook. Worth a try.

 

C

clivees

Well-Known Member

• Sep 29, 2006

• #4

Most (Good) key fob alarm systems change the code each time they are used
and they need to be kept in-sync by 5 or 6 codes, this allows for accedental key presses.
As Spyderman says there is usually a re-sync process involving putting the key in the ignition and pushing some buttons.
The manual or the local dealer or Disco boys should know.

Regards
Clive

Ps
having a quick google i found the following
Pressing either of the buttons rapidly 5 times resets the code.
or
Insert the key into ignition switch and turned it to "II", pressed unlock long(10sec).

 

I

Insane Drifter

New Member

• Sep 30, 2006

• #5

Thanks to those that replied , i will give it a go and hope for the best

Thanks again

 

D

discomania

Well-Known Member

• Oct 1, 2006

• #6

There is a way with the key in the door lock, you like open and lock it 6 times, then unlock and pause for a second, and do it again etc... and it will disable the alarm/immoboliser. The procedure is in the manual, I'll have a look for mine.