Lazydave

Well-Known Member

• Jan 11, 2018

• #1

Hi. I have just purchased a 2002 Discovery Td5 manual as a project for myself and my 16 year old son. Working through the mot fail list. This site has proved invaluable. We have fixed the 3 amigos. Currently working on srs short to ignition drivers airbag. Then 2 Rh ball joints to do.
Dean

 

Marmaduke

Well-Known Member

• Jan 12, 2018

• #2

Welcome to the forum proper, lazydave but your name's Dean??

 

Lazydave

Well-Known Member

• Jan 12, 2018

• #3

Yep, Dino was already taken.

 

dieseldog69

Well-Known Member

LZIR Despatch Agent

• Jan 12, 2018

• #4

Welcomme

Hope you stick around, got any pictures?

Not of "THAT" either

 

Marmaduke

Well-Known Member

• Jan 12, 2018

• #5

Lazydave said:

Yep, Dino was already taken.

Click to expand...

Fair enough

 

Lazydave

Well-Known Member

• Jan 12, 2018

• #6

[GALLERY=]

[/GALLERY]

 

Disco1BFG

Well-Known Member

Full Member

• Jan 12, 2018

• #7

Welcome aboard

+1 for some piccies! - Ah! you beat me to it - looks nice does that

What's the chassis like ?

 

Lazydave

Well-Known Member

• Jan 12, 2018

• #8

[GALLERY=][/GALLERY]

Disco1BFG said:

Welcome aboard

+1 for some piccies! - Ah! you beat me to it - looks nice does that

What's the chassis like ?

Click to expand...

Failed MOT on 3 Amigos (fixed). SRS light on. Still working on this. 2 offside ball joints (next job). Wiper blades (done). Sidelight (done). Headlight aim (done). Twisted brake hose (done). Chassis is rusty but ok. It had a running issue. Lack of power over 3000rpm/ engine cutting out. Fitted a spacer to crank sensor today and now it runs and revs freely.
Not too bad for £1400.

 

Lazydave

Well-Known Member

• Jan 16, 2018

• #9

SRS sorted. Faulty ECU. Ten quid from the bay
Ball joints next.

 

Lazydave

Well-Known Member

• Jan 18, 2018

• #10

Ball joint are off. All done on the drive. Sleet and rain stopped play.

 

Lazydave

Well-Known Member

• Jan 19, 2018

• #11

Managed to finish ball joints today. Not too bad on the driveway and with a 60 quid bay tool.
Just the chassis to scrape and clean off. Treat with aqua steel and re-underseal.
I will then be a happy bunny.

 

Attachments

• 
  20180119_121206.jpg

  943.2 KB · Views: 118

Lazydave

Well-Known Member

• Jan 23, 2018

• #12

All MOT work completed. Next job coolant and thermostat.

 

Attachments

• 
  20180123_144103.jpg

  228.6 KB · Views: 116

biketeacherdave

Well-Known Member

• Jan 23, 2018

• #13

Lazydave said:

Managed to finish ball joints today. Not too bad on the driveway and with a 60 quid bay tool.
Just the chassis to scrape and clean off. Treat with aqua steel and re-underseal.
I will then be a happy bunny.

Click to expand...

So which tool did you buy ??

 

Lazydave

Well-Known Member

• Jan 23, 2018

• #14

E bay special. 21 piece.

 

Attachments

• 
  20180119_120902.jpg

  747.7 KB · Views: 125

Lazydave

Well-Known Member

• Feb 21, 2018

• #15

Well MOT passed yesterday ( 1 advisory.....oil leak ). Took for a spin on the motorway today and it pulls like a train.
I originally bought from a sales lot who had had it diagnosed as worn dmf catching crank sensor. I test drove it and had no power going up hill.
Did a bit of research and fitted a spacer and replaced missing o ring on the sensor.
It now goes well.