blue beasty
Leaks an prone to bits dropping off
acropolico
New Member
Hi All,
I'm doing a Masters Degree in Brand Management at University of East Anglia, UK.
I'm doing a module on Brand Awareness and have chosen Landrover as a Brand to investigate.
I have used survey Monkey to make it easier, however since I have used the free option, unfortunately this means its split into three parts......
The links are: -
Landrover Brand Awareness Survey
LandRover Brand Awareness Part 2 Survey
Landrover Brand Awareness Part 3 Survey
It would be great if Land Rover owners could answer these questions using the links above.
It won't take long - ranging between 15 or 20 minutes and are mostly questions asking for your opinion.
The objective of my study is to analyze hoe well the LR brand is managed. I would like to point out that the questions should be answered from the perspective of Land Rover only and not Range Rover, Jaguar or Tata Motors.
THank you very much for your help.
I'm doing a Masters Degree in Brand Management at University of East Anglia, UK.
I'm doing a module on Brand Awareness and have chosen Landrover as a Brand to investigate.
I have used survey Monkey to make it easier, however since I have used the free option, unfortunately this means its split into three parts......
The links are: -
Landrover Brand Awareness Survey
LandRover Brand Awareness Part 2 Survey
Landrover Brand Awareness Part 3 Survey
It would be great if Land Rover owners could answer these questions using the links above.
It won't take long - ranging between 15 or 20 minutes and are mostly questions asking for your opinion.
The objective of my study is to analyze hoe well the LR brand is managed. I would like to point out that the questions should be answered from the perspective of Land Rover only and not Range Rover, Jaguar or Tata Motors.
THank you very much for your help.
Thankyou muscrat, your advice was spot on. Stripped the loom out and cleaned it all up with cellulose and air blower, did the same with all the plugs and connections down to the ECU box (oil in there) put it all back together and works fine. Ordered a new loom from brookwells to fit. Fitted a new britpart waterpump 4 days ago done 15 miles and is now leaking out the drain hole, just wondererd if thats a new record for britpart? Once again thank you.
As Freelaner pointed out I misunderstood the use of this box, so Hello to everybody. My Landy history started many years ago with an old seriesII rag top pick up wich seemed to have an old oil burning engine from perkins, I then got a disco II with td5 but that didnt like being on its wheels, it much preffered sliding down tracks on its side and roof. Then being a glutten for punishment got another discoII td5 with a load of engine niggles.
I live in Torquay and run a small multi trade service company and restore old cars for a hobby,(didnt think the latter would include my own Landy).
Thank you all and look forward to a long and happy relationship here>
I live in Torquay and run a small multi trade service company and restore old cars for a hobby,(didnt think the latter would include my own Landy).
Thank you all and look forward to a long and happy relationship here>
discogal
Active Member
Welcome To the forum or should that read welcome to the pleasure dome frigate I live near Dartmouth so not a million miles away and drive a 1994 200tdi .:bounce:
discogal
Active Member
No I''m nursing mine , I think she might break in half if I took her of road , her MOT. Is coming up at the end of jan and I had welding done on her last year so reckon that there might be more needed this time . I'm hoping some may let me loose with a welder and teach me how to weld I'm certainly willing to hwavee a go especially as it would be cheaper to do her up then!
If you get stuck I've got all the gear and can show you how to use it, be good if youve got somewhere under cover for her though, my garage wont take a landy and its full of a tr7 im doing up!
