landy-lee · Apr 15, 2017

Hi guys n gals

So i have been wanting a defender for some years and a few weeks ago i got one!

Been doing a few jobs on the old boy and thought some of you lot would like to see what I'm up to plus you might spot something I'm doing/done wrong.

Meet PHIN (his name and a star wars characters.)

neilly · Apr 15, 2017

Hi Lee,

Tis a clean looking old girl you got there, ooops , appears yours is a male.
If you are planning on using the Snorkel, make sure it works as it should.

Cheers

PS, the wipers are wonky..............had to find something to pick on.......LOL

landy-lee · Apr 15, 2017

neilly said:
Hi Lee,

Tis a clean looking old girl you got there, ooops , appears yours is a male.
If you are planning on using the Snorkel, make sure it works as it should.

Cheers

PS, the wipers are wonky..............had to find something to pick on.......LOL

the wiper are on my job list!

when i fitted the snorkel i took all the induction pipes off and checked for holes where maybe a pipe had been rubbing. put it all back together with a smear or sealer. i got the wing covered in the stuff but luckily brake cleaner got it off the panel and my hands! lol

neilly · Apr 15, 2017

Did you try the stall test to see if it is sealed correctly?

You know the list never gets any shorter..... at least mine never does.

Cheers

landy-lee · Apr 15, 2017

neilly said:
Did you try the stall test to see if it is sealed correctly?

You know the list never gets any shorter..... at least mine never does.

Cheers

no! I'm guessing put your hand over the top with the top hat/inlet off???

neilly · Apr 15, 2017

I tend to use my Haynes manual, it has to be good for something.

It has quite a suck , so use something that is not going to disappear in there.

Cheers

landy-lee · Apr 15, 2017

neilly said:
I tend to use my Haynes manual, it has to be good for something.

It has quite a suck , so use something that is not going to disappear in there.

Cheers

one for the job list! thanks and this is why i love this forum!

neilly · Apr 15, 2017

landy-lee said:
one for the job list! thanks and this is why i love this forum!

Oh, also check your ducks bill on the air filter housing. I sealed mine up with sealant.

Cheers

Foxyred · Apr 15, 2017

Welcome . Make sure its secure Safe T pedal is good, But bulky and heavy, plus a wheel lock is a good visible deterrent. When you need tires go and see Charles at Bardills

notenoughtime · Apr 16, 2017

Nice looking defender you have there Lee! Definitely get some security on it!

landy-lee · Apr 16, 2017

So over the weekend i have striped the front grill, rad and intercooler off to give me better access when i change the timing belt.
I thought this would be a good time to flush the old coolant from the engine, rad and also clean out both the intercooler ind inlet as i am removing the EGR crap off.

I was pleasantly surprised to see how clean the inlet runners are. i was expecting a lot of carbon from the EGR.
May be a new head has been fitted or maybe the EGR is disconnected somewhere who knows.

heres my hillbilly hot tank AKA the dishwasher! what she don't know won't hurt her lol

Foxyred · Apr 16, 2017

Brave man ! Hope she never looks on here

neilly · Apr 16, 2017

If you are doing the timing belt, have you cracked the crank pulley bolt loose yet?
Also, was there a load of mugs etc, in the top tray of the dishwasher?

Cheers

landy-lee · Apr 16, 2017

neilly said:
If you are doing the timing belt, have you cracked the crank pulley bolt loose yet?
Also, was there a load of mugs etc, in the top tray of the dishwasher?

Cheers

No mate not yet. Once the timing tool kit comes and the fan spanner i will have a look at the bolt then. I'm a plant fitter by trade so i have some beefy tools.

And yes some mugs where in the top so i had to give them a second spin lool

greyhair · Apr 16, 2017

landy-lee said:
So over the weekend i have striped the front grill, rad and intercooler off to give me better access when i change the timing belt.
I thought this would be a good time to flush the old coolant from the engine, rad and also clean out both the intercooler ind inlet as i am removing the EGR crap off.

I was pleasantly surprised to see how clean the inlet runners are. i was expecting a lot of carbon from the EGR.
May be a new head has been fitted or maybe the EGR is disconnected somewhere who knows.

View attachment 121533

View attachment 121535

heres my hillbilly hot tank AKA the dishwasher! what she don't know won't hurt her lol
View attachment 121536

You is one brave man!

Lander123 · Apr 21, 2017

Nice choice for the name. Phin is looking great

ifloochies · Apr 21, 2017

heres my hillbilly hot tank AKA the dishwasher! what she don't know won't hurt her lol
View attachment 121536[/QUOTE] Even without me telling on you, trust me, she'll know; they always know. It's a mystery how mine always somehow finds out I've been spending money on the car, or improvising cleanups with her utensils even though I clean up after myself still baffles me....mysterious creatures they are

Tim_AM · Apr 21, 2017

nice rig

Mulcaster1 · Apr 22, 2017

If I call to see - I will bring my own cup for the coffee! Looks great btw

landy-lee · Apr 23, 2017

Aup

Been blasting and painting today. hopefully i will build up the rad and intercooler frame this week ready for putting the old boy back together next weekend.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Similar threads