1988smithy
Well-Known Member
Neil mate I reckon that's gonna get hammered on here!
I like the front, it works for me. See what you mean about the rear but don't really know what else you could do.
Whereabouts in Birmingham are ya?
I like the front, it works for me. See what you mean about the rear but don't really know what else you could do.
Whereabouts in Birmingham are ya?
Neil V8
Member
Hi Smithy, mate I got a thick skin, I'm a bus driver & also run a car club. I know some will hate it, but that's their problem
I'm South Brum, B32.
Neil V8
Member
Hi Rob, it belonged to a body shop owner, as far as I can work out from the details of the private plate transfer paperwork. Can see what you mean about colouring between the rear lamps. Down side is, that what looks black, is actually a black tinted lacquer over a metallic orange base, changes colour in the sun. But thanks for the idea, I'll work with it and see how it goes... Watch this space!
Neil V8
Member
Thanks Dan, I like it, .that's all that really matters to me Just need to get it serviced, some matching tyres (my OCD is going nuts) and sort the audio & interior, especially the roof lining (as it's been pulled down to fit a video screen for the rear, but not put back very well)
Neil V8
Member
Yeah, thinking about that too, as the door frames & apertures need painting anyway, due to scratches & a bit of dodgy looking carbon vinyl wrap on the B posts.Very trick on the paint
I like the RRs floating roof - I wonder whether the A, B, C and D pillars ought to be dark grey to restore that effect?
Good luck with it: the paint finish does look stunning from the pictures
Love that front end on it and the rear aint that bad considering what it could have been 
1988smithy
Well-Known Member
Maybe a lower bumper section, dare I say, diffuser for the rear? Nothing brash just a nice formed extension to bring the line down. have to drop exhausts a little. Just to match the front level like
Neil V8
Member
Thanks mateLove that front end on it and the rear aint that bad considering what it could have been
Neil V8
Member
Yeah I think a fatter rear bumper would bring a bit of balance. I gotta sort the exhausts anyway, it's a standard looking system with some nasty, rusty chrome tits that have been welded on the p!$$.
Mid life crisis
Member
Nice range, I do like white
marcostriumph
Member
do a bit of photoshopping: Black A and D pillars, a black band between the rearlights, exhaustpipes that come out straight rather than angled and a diffusor under the bumper to lower the line. And loose the reflectors if you can.
Goc3k
Well-Known Member
Bin the lights on the tailgate if possible and the dodgy looking reflectors, i'd put a gloss black band between the rear light clusters the height of the clusters across the tailgate to break it up a bit along with smithy's bumper and pipe suggestion, along with a re-colour of the roof pillars as rob said! Might fancy some sort of black tread plate on the wear area of the rear bumper as well if it were me
A little alignment of the margins on the front and a bit of fettling and it'll look rather smart as long as you like the Essex paint job
A little alignment of the margins on the front and a bit of fettling and it'll look rather smart as long as you like the Essex paint job
biketeacherdave
Well-Known Member
I will happily supply the match and petrol foc to burn it......my eyes hurt now
