don't under sell yourself as to the value of your product. Make contact in the USA to the rebuilders or US land rover forum. they need doors badly. http://eastcoastrover.com/ Sell if they want to be the US distributor for you. You basically got a gold mine on your hands
http://www.roverparts.com/warehouses/
http://www.roverparts.com/warehouses/
Last edited:
West Slope Rover
Well-Known Member
USA Land Rover forums are a barren plain where posts languish in a lonely, quiet oblivion.
I Knows.
I believe you are under charging for a superior product. You should sell at the same as other replacement doors.
And If someone says I can buy cheaper off of Ebay, well tell them to buy it there.
wattfield
AKA Dirk Diggler
I agree, but don't tell him until I've bought one!
blue beasty
Leaks an prone to bits dropping off
Sigh.....
Does anyone want to make it more obvious just to make sure my blind old eyes can't miss it?
@ghound they look amazing mate, you could easily ask more and I wish you the best of luck BUT....
You can't sell anything here until you have 50 posts and as a commercial product you need to message accywingy and ask about sponsorship
Does anyone want to make it more obvious just to make sure my blind old eyes can't miss it?
@ghound they look amazing mate, you could easily ask more and I wish you the best of luck BUT....
You can't sell anything here until you have 50 posts and as a commercial product you need to message accywingy and ask about sponsorship
Think this 1 deserves a break. This is not your typical spam. If any corrective action is necessary, then leave the thread but maybe lock it.
Sorry blue im not trying to sell them im just trying to get a bit of feedback from members on the design/makeup of the doors and if they are a goer or not.
This was a prototype door and is off to a guy for testing around a few off road venues with a big oversized wheel bolted to.
Again sorry if I've broken any rules, if so please delete it, thanks Robert
This was a prototype door and is off to a guy for testing around a few off road venues with a big oversized wheel bolted to.
Again sorry if I've broken any rules, if so please delete it, thanks Robert
blue beasty
Leaks an prone to bits dropping off
Feedback for a prototype is fine and it looks like a great product.
The more people try and actually buy them the more pressure there is to apply the rules so come folks stop being stupid and give proper feedback
ER1C
Well-Known Member
Ok Ok... Looks 7... but the singing was crap and I would only give that a 3
ER1C
Well-Known Member
It would be useful to know. How did you make them ? How did you get the measurements ?
Which model do they fit (all Defenders from when to when) ?
Just need to be painted and existing fittings put on I assume ?
I see no hole for the rear wiper ? (is that something you could add ?)
Door Card holes are not present, Obviously most folks can do this themselves but I am just trying to be helpful.
How does the window fit in ? I haven't looked at mine but I imagine fabricating the lip for that may be tricky...
Which model do they fit (all Defenders from when to when) ?
Just need to be painted and existing fittings put on I assume ?
I see no hole for the rear wiper ? (is that something you could add ?)
Door Card holes are not present, Obviously most folks can do this themselves but I am just trying to be helpful.
How does the window fit in ? I haven't looked at mine but I imagine fabricating the lip for that may be tricky...
