G

Gunny

New Member

• Mar 14, 2010

• #1

My heater refuses to work on any setting, but drive along and suddenly it works, any ideas guys

 

jonb76

New Member

• Mar 14, 2010

• #2

does your temp needle stay in the middle or go near red? only asking coz had a similar problem with mine, (95 tdi) turned out to be blocked pipes from coolant expansion tank. have you flushed your cooling system?....hope this helps

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Mar 14, 2010

• #3

As jonb76 says ... could also be airlocked somewhere in the system, so again, flush through thoroughly ..

 

N

nicedayforit

New Member

• Mar 14, 2010

• #4

Gunny said:

My heater refuses to work on any setting, but drive along and suddenly it works, any ideas guys

Click to expand...

Do you mean the blower fan doesn't work on any setting or that the fan is ok but no heat?

 

Pikey

Dummy Ejection Facilitator..

• Mar 14, 2010

• #5

loose connection if it's the fan that's not working. bugger to sort as it's virtually a dash out job to sort it.

 

N

nicedayforit

New Member

• Mar 14, 2010

• #6

redhand said:

loose connection if it's the fan that's not working. bugger to sort as it's virtually a dash out job to sort it.

Click to expand...

Depends whether it's a 200 or a 300.
300 is easy, 200 easier just to do without heat.

 

Pikey

Dummy Ejection Facilitator..

• Mar 14, 2010

• #7

nicedayforit said:

Depends whether it's a 200 or a 300.
300 is easy, 200 easier just to do without heat.

Click to expand...

200tdi with aircon oh the joy.. :doh:

 

G

Gunny

New Member

• Mar 14, 2010

• #8

It's 200 tdi the blower doesen't work until I drive along and either corner or go over bump

 

uncle albert

New Member

• Mar 14, 2010

• #9

Gunny said:

It's 200 tdi the blower doesen't work until I drive along and either corner or go over bump

Click to expand...

Hi is it noisy when it does work?

 

G

Gunny

New Member

• Mar 14, 2010

• #10

uncle albert said:

Hi is it noisy when it does work?

Click to expand...

no sounds normal

 

P

paddocks1967

New Member

• Mar 14, 2010

• #11

it could be the connections behind the switch,when you slide it along for fan speed it is not touching the copper terminal ,just wear and tear,but it can be fixed.