Shakari
Member
Hi everyone, just joined up and hope someone can help, I have a freelander 1 td4 2005 and I have just put on an EGR bypass unit, I also took off the air intake manifold and scrubbed out all the gunk, I also fitted a crankcase breather upgrade part, reason for this was I had no heat even after 12 miles it was still cold air but now my heater is a lot warmer but not hot, my temp gauge is now at 11 o’clock and I was thinking of flushing the heater matrix but firstly I’m not sure which pipe is the inlet or outlet also is there anything else I should be aware of?
I also let it heat up and the top right hand radiator hose was cold (as in passenger side) but the drivers side top and also the bottom was fairly hot, is this a problem or is that something to do with the flush I’m about to do?
Any help and advice would be appreciated.
I also let it heat up and the top right hand radiator hose was cold (as in passenger side) but the drivers side top and also the bottom was fairly hot, is this a problem or is that something to do with the flush I’m about to do?
Any help and advice would be appreciated.