Aflyingduckling

Member

• Feb 17, 2022

• #1

Hi everyone, as I am sure you are aware land rover series are rusty. This includes the heater blower housing, mine has disintegrated. I have the motor and it works and all, I need a new housing or complete set if one can be found for a decent price. Has anyone else had this happen? If so how did you source the part etc. Any advice would be very welcome. Plz help bit of a newbie here lol.

 

Al2O3

Well-Known Member

Full Member

• Feb 26, 2022

• #2

Aflyingduckling said:

Hi everyone, as I am sure you are aware land rover series are rusty. This includes the heater blower housing, mine has disintegrated. I have the motor and it works and all, I need a new housing or complete set if one can be found for a decent price. Has anyone else had this happen? If so how did you source the part etc. Any advice would be very welcome. Plz help bit of a newbie here lol.

Click to expand...

You would be better off posting this in the Series section of the forum. Or, @blue beasty might move it for you.

 

Bobsticle

De Villes Advocaat

• Feb 26, 2022

• #3

Expensive even if you can find one. Looks like a long wait on ebay or off to a scrap yard.
I half remember someone on here making their own but it involved lots of bending and spot welding.

 

WoodyO

Well-Known Member

• Feb 27, 2022

• #4

I took a different approach and added an electric inline blower, taking air from behind the radiator and straight into the heater box.

Cheap and easy, good ram-air effect and even with the bikini roof on I still feel the warmth.

Series 3 109 - 1973 - Full Restore

 

dag019

Well-Known Member

• Feb 28, 2022

• #5

As everyone else has said is basically correct. I am in the process of doing this with mine. It took me about 18 months to find a housing at reasonable price at one of the auto jumbles. If you can weld it may be possible to repair your current one and if you cant weld you may be able to fibreglass patch it, but again depends on how far done it is. Lots of people have also gone down the non original route similar to @WoodyO, there are several threads on here of people using bilge blowers as the fan.

 

N

nickjaxe

Well-Known Member

• Feb 28, 2022

• #6

The base of mine rotted away....patched it up with my mig welder.....fine now....not pretty but works good as new....