j the range
New Member
hahaahaha yes you is,lol. do a seach theres a guy that comes out to you and does it in 3 hours..
Pikey
Dummy Ejection Facilitator..
I prefer the term purveyor of exotic favors.
j the range
New Member
i will try and remember that, next tume some body calls me a slut..
Heater matrix needs repairing (water was leaking onto the drivers carpet, the cars been in a week now (although parts didn't turn up till tuesday) don't want to keep nagging at them but not having a motor is driving me crazy.
Just wanted to know how long it should take but if it is just a few hour job then I am wondering if they just dont want to do it. Hopefully will get some info tomorrow.
Just wanted to know how long it should take but if it is just a few hour job then I am wondering if they just dont want to do it. Hopefully will get some info tomorrow.
Pikey
Dummy Ejection Facilitator..
Typical garage. Leave the **** jobs till last. and then make out the delay is because of the difficulty of the job and try to charge 4times what it should have cost. Oh and check ya mileage. they'll have been using it as runaround sanndwich run motor..
kooky_guy
Well-Known Member
You sure it's the matrix? Sounds like the heater o rings to me. Is my next job to do on mine. Can't wait!
Irishrover
Well-Known Member
Took me 5 hours to remove the dash a few years ago and about 6hrs to refit. Impossible to do single handed, needs at least three people, you wouldn't believe how heavy and cumbersome they are. I made up a set of guide/support pins which helped no end in lining it up to fit the nuts.
Advantage is that you can get at the blend motors and heater components easier.
Advantage is that you can get at the blend motors and heater components easier.
Pikey
Dummy Ejection Facilitator..
Should of got a disco piece of **** to do on ya own.
and better motor offroad anorl.
