B

Bustergonad

Member

• Jan 6, 2016

• #1

Hi guys and gals any advice would be great to get heater to effectively clear the windscreen, I know there are pulley up an down things each side of the clock but which way do they need to be pushed to get it to work as I can hear it but can't feel any breeze anywhere could it be pipes have disconnected or something.
Regards
Buster

 

Marmaduke

Well-Known Member

• Jan 6, 2016

• #2

The handle nearest to the steering wheel controls the heat, up for hot down for cold, although you may have to use your imagination. The handle nearest to the door controls the direction, down for feet and up for windscreen and the fan control is on the left of the dash

 

B

Bustergonad

Member

• Jan 6, 2016

• #3

Cheers how much blow should there be a little or ???
Cheers

 

waldamar

Well-Known Member

• Jan 6, 2016

• #4

Hardly any! but yes it could be pipes adrift - on my old 110 I have a "down" vent by my knees - see if any air is coming from there - then put in up position and see if there's any on the screen - little or none probably pipework behind clocks.................... good luck

 

mikescuba

Well-Known Member

• Jan 6, 2016

• #5

I have a 200 tdi and the heaters are crap, I have done everything. If your not getting any air coming through check your connections under the bonnet to the heater unit. But don't expect too much from them. Also check the airflow just above your feet/legs see if any air is coming out from there. If not then it sounds like you will have to strip the heater unit. You will need a rivet gun to get it back together again.

 

Flossie

Well-Known Member

• Jan 6, 2016

• #6

Take the dash panel out , see if the rubber frangers have dropped off the vents.
Mine blows fine and cooks me legs when it's hot.
200tdi BTW.

 

B

Bustergonad

Member

• Jan 6, 2016

• #7

Cheers