Disc300Series
Active Member
I need to improve my heater fan as its very poor, has anyone completed am upgrade or tried running the Fan on 24 Volts ?
Disc300Series
Active Member
Poor air flow, I have plenty of heat as matrix is brand new.
MayorQuimby
Active Member
To be honest the standard heater is perfectly good if everything is as it should be and all the cables are correctly adjusted. That's a big if though. I would make sure everything is 100% before looking at upgrades, of which there aren't many.
The best upgrade you can make to the heater is get a V8
The best upgrade you can make to the heater is get a V8
Disc300Series
Active Member
Have read somewhere people fit a bildge fan inline to the air intake to the fan.
"Have read somewhere people fit a bildge fan inline to the air intake to the fan."
As already stated, standard set-up is more than adequate if it is working correctly so spend a few minutes checking it through before making the system more complicated for what might be negligible results.
My 90 soft-top has been my daily driver for 16-years and the heating system is completely standard but I have yet to find the cab a chilly place to be on even the coldest of days. All I did was make sure that it was all set-up correctly (I think they leave the factory with the heater cables out of adjustment) and there are no draughts. Simples.
As already stated, standard set-up is more than adequate if it is working correctly so spend a few minutes checking it through before making the system more complicated for what might be negligible results.
My 90 soft-top has been my daily driver for 16-years and the heating system is completely standard but I have yet to find the cab a chilly place to be on even the coldest of days. All I did was make sure that it was all set-up correctly (I think they leave the factory with the heater cables out of adjustment) and there are no draughts. Simples.
