trax99

Well-Known Member

• Jan 18, 2014

• #1

finally bit the bullet and stripped out the heater from my 110 in an attempt to get the heater working, found a number of issues but the main one is the fan motor, seized up solid and when I freed it off still no good, so does anyone have a fan motor knocking about they want to swap for beer tokens?

 

aaronmorris

Head's a shed

• Jan 18, 2014

• #2

I need one anorl, Mine never hasn't got one fitted at all

 

P

pussa13

Active Member

• Jan 21, 2014

• #3

Fitted a TD5 heater box in my old 90, will look in the garage this morning to see if I kept the old heater box, the fan motor was ok.

 

the_wolf

Well-Known Member

• Jan 21, 2014

• #4

If you've got it stripped out do ya fancy doin me a favour? Any chance you could measure the length and diameter of the shaft that the actual impeller fits onto and the circumference of the motor itself? I've always wanted to replace it with a more powerful motor but was very reluctant to strip it all apart to measure it

 

big si

Well-Known Member

• Jan 21, 2014

• #5

When i stripped mine down i sealed every possible seam with silicone, and replaced the bulkhead seal aswell, the difference was huge, old 200 tdi box works a treat now and warms up loads quicker.