+1usually a sign of the heating element has failed
2.0_hippo
Well-Known Member
+1
Im sure thats the problem as my "heated steering wheel" is not so heated anymore lol
Now it's like a ice block lol
Button lights up for a second before going out
Mine does the same too....
Never had a heated SW before so I'm sure I won't miss it, but it would be nice have I guess!!
2.0_hippo
Well-Known Member
I thought the same but I really like the Parchment/Walnut one and that is like £350 odd it can wait!!
2.0_hippo
Well-Known Member
I thought the same but I really like the Parchment/Walnut one and that is like £350 odd it can wait!!
Nice one.
But the black, genuine LR one will do
2.0_hippo
Well-Known Member
RS2000CUSTOM
Active Member
Have you done the "self-diagnosis" test yet ?
???
???
RS2000CUSTOM
Active Member
Fault Finding
In the self-test mode the switch indicates faults by displaying a flashing code.
The sequence to select test mode is :
1/ Press the heating switch with the ignition off
2/ With the switch depressed turn on the ignition switch to Position II
3/ Release the switch, this activates the self-test mode
4/ After 10 seconds the flashing code is displayed.
The flashing code indicates the following faults
1 Flash = Switch overtemperature
2 Flashes = Short circuit and/or interruption in the sensor
3 Flashes = Short circuit and/or interruption in the heating elements.
With the switch set to test mode, maximum heating is selected and both lamps are lit. If a fault is identified the heating is switched off and, after 10 seconds, the left LED switches off , this LED generates the flashing code. If no fault is detected the LED remains unlit.
To return to the test mode the switch is pressed twice and the sequence starts again.
To cancel the test mode the ignition switch is turned off.
RS2000CUSTOM
Active Member
now every L322 owner is scrambling to go outside and try this
Works on heated rear seats as well :bounce:
As I have stated on other threads
RS2000CUSTOM said:
