rawsondsr

Member
I have never had a headliner in ,mu One Ten, I found one on ebay for £35, some meterial to recover it and set about it.
I had plenty of fabric left over after doing the headlining, so as i had zero other interior trim, i made some up, two panels to go around the rear side windows, two panels for the two rear windows beside the back doors, and to trim strips above the rear side doors. this used up all the leftover material and glue. should be a bit quieter now (maybe!)
 

Attachments

  • 2015-01-11 11.18.10 (Small).jpg
    2015-01-11 11.18.10 (Small).jpg
    47.6 KB · Views: 358
  • 2015-01-11 13.07.36 (Small).jpg
    2015-01-11 13.07.36 (Small).jpg
    59.3 KB · Views: 389
  • 2015-01-11 15.50.06 (Small).jpg
    2015-01-11 15.50.06 (Small).jpg
    69.4 KB · Views: 348
  • 2015-01-13 11.56.41 (Small).jpg
    2015-01-13 11.56.41 (Small).jpg
    68.6 KB · Views: 568
  • 2015-01-13 11.57.00 (Small).jpg
    2015-01-13 11.57.00 (Small).jpg
    69 KB · Views: 338
  • 2015-01-20 15.08.16 (Small).jpg
    2015-01-20 15.08.16 (Small).jpg
    59 KB · Views: 389
  • 2015-01-20 15.08.38 (Small).jpg
    2015-01-20 15.08.38 (Small).jpg
    52.2 KB · Views: 326
  • 2015-01-20 15.08.58 (Small).jpg
    2015-01-20 15.08.58 (Small).jpg
    53.8 KB · Views: 395
  • 2015-01-20 15.09.49 (Small).jpg
    2015-01-20 15.09.49 (Small).jpg
    57.4 KB · Views: 330
  • 2015-01-20 15.09.54 (Small).jpg
    2015-01-20 15.09.54 (Small).jpg
    55.2 KB · Views: 341
It's quite an easy job to do, even round all the curves and corners, just smoth the fabric out and jobs a good un
 
I have never had a headliner in ,mu One Ten, I found one on ebay for £35, some meterial to recover it and set about it.
I had plenty of fabric left over after doing the headlining, so as i had zero other interior trim, i made some up, two panels to go around the rear side windows, two panels for the two rear windows beside the back doors, and to trim strips above the rear side doors. this used up all the leftover material and glue. should be a bit quieter now (maybe!)

That looks great,do you have link to the material you used
 
Have a headlining to repair for my 90 and was searching for the material....now sorted after this thread, thanks! :D
 

Similar threads