B

Biglad2222

Member
P38 2.5 rangerover 1999 headlights staying on when engine running also no windows work or door locks any advice please
 
There's an electrical troubleshooting guide on here somewhere. Also on RR.net.

Any messages on the dash?

Also might be worth sniffing round the fusebox.
 
Lights are switched on by the BeCM on inputs from the controls and/or BeCM settings (one of which is dipped beam headlights as DRL) as @kermit_rr says.
If you DIDN'T set this setting then it either thinks the rotary switch is calling for headlights or the BeCM settings are on the wobble due to "low-volts"?
What's the battery voltage like when:
1. The car is cold.
2. The car is running with everything on and engine at 2,000RPM.
 
Hi yes I'm beginning to wonder if its the battery as I charged it up and then started car ,locks worked, lights stayed off for a few seconds then started to go on and off im wondering if voltage of battery is poor
 
Measure battery voltage with the engine running, no accessories turned on and again with everything turned on. Both values should be between 13 and 15 volts.
 
I can't recommend disconnecting the battery while the engine is running, you risk all sorts of damage.
 
You must log in or register to reply here.

Similar threads

feyniriel
P38 key not locking the car
Replies
13
Views
794
Grrrrrr
Grrrrrr
Notmyrealname88
08 Range Rover All exterior lights flickering randomly
Replies
10
Views
999
Mark Piercy
Mark Piercy
feyniriel
P38 rear left window button not working.
Replies
7
Views
926
pwood999
pwood999
T
L322 no illumination on instrument cluster
Replies
14
Views
2K
gstuart
gstuart
J
Classic 1982 Range Rover 3.5 V8 CHARGING ISSUES
Replies
18
Views
1K
Ratae
R