shunter v8

Active Member
I was looking to put new wiper blades on the headlights of my 2004 l322 but are they unavailable now as I can't find any, plenty of P38 ones for sale but not for the l322. Anyone know where i can get them thanks.
 
What would u do with Google? First find the part number of the blades and then find a stockist.
Let me Google for you.
DKC 000070 and Craddocks have them listed on there site, otherwise have you tried your local LR main dealer.
 

Attachments

  • CAA008F7-153E-4593-A473-C50DC6C387D9.png
    CAA008F7-153E-4593-A473-C50DC6C387D9.png
    109.9 KB · Views: 151
Thanks I did do a search but not with the part number as I was hoping to find aftermarket ones. Thanks for your post.
 
They are 14cm I was hoping that they were interchangeable but I doubt I will be that lucky. The blades have gone rock hard on mine.
 
They are 14cm I was hoping that they were interchangeable but I doubt I will be that lucky. The blades have gone rock hard on mine.
The P38 uses 14cm blades, I've just checked. Perhaps if the mounting is not the same, you could use the rubber blades. I wonder also if you could cannibalise a standard screen wiper rubber?
P38 headlight wiper blades are available from Island 4x4 for £1.99 plus VAT.
 
Last edited:
I bought a pair of P38 wiper blades and the good news is they can be adapted to fit, I removed the rubber blade from the arm of the new ones then slide out the two metal strips in the rubber, you then need to file a new drift in the metal strips to line up with the mounting clips on the l322 wiper arm, complete job done in 15 minutes and in the future you can reuse the metal strips, total cost was £5.
 
You used to be able to buy just the rubber and slide it in. No wipers on mine so not sure if it is still possible.
 
I bought a pair of P38 wiper blades and the good news is they can be adapted to fit, I removed the rubber blade from the arm of the new ones then slide out the two metal strips in the rubber, you then need to file a new drift in the metal strips to line up with the mounting clips on the l322 wiper arm, complete job done in 15 minutes and in the future you can reuse the metal strips, total cost was £5.


All that faff isn't necessary. Unless you really want to. I had mine replaced last year . Admittedly they're OEM and weren't cheap, but they are available. :)
 
It only took 15 minutes so not really any faff at all, I think the genuine ones were about £25 each so I know what route I would rather take.
 

Similar threads