T

Tomsk

New Member

• May 13, 2011

• #1

Need to sort my lights out for the MOT.

Low beam and side lights are fine.
Main beam when selected is fine.
High beam when selected

Drivers side headlamp goes off completely.
Passenger side behaves as expected.

New bulbs being used etc.

Bad earth? Any suggestions how to go about trouble shooting this?

Many thanks

 

wiltshire landyman

I’m back

• May 13, 2011

• #2

you answerd your own qs

 

Liverpool.90

Active Member

• May 13, 2011

• #3

I had this problem but in reverse. High beam worked fine but driver side Main didn't work. Turned out it was a fuse, last thing I checked too after stripping down the wing to check all wiring and earths.

 

bustersbus

Well-Known Member

• May 14, 2011

• #4

Check yer earths and connections.... nae need tae take the wing off either

 

bustersbus

Well-Known Member

• May 14, 2011

• #5

If ye stick yer heid in the drivers side wing, ye'll see a clump o' wires and connectors. The black wires are yer earths. There 's probably a black wire that's screwed tae the inner wing. Clean all yer connectors and see what happens