spalding1968

New Member
Guys.
My headlight level adjuster dosent work. It seems to be pointing very low and i cant find a way to raise it. I have discussed it with a landy owner pal of mine and he says his has never worked while he has owned his. I cant just leave this as he has. I cant find any fuse relating to the level motors and wondered if it was controled by any of the electronic modules. I havent yet removed the switch/selector but the actual motors seem in good condition. what do you recomend is my first thing to look at?
many thanks for any advice.
 
If it's anything like the D1, check the plastic clips haven't failed. Mine have so the adjuster moves in and out of a slack clip without moving the headlight.
 
I had this on a D2. The fault was in the switch that controls the height. I took it apart and cleaned the contacts inside and hey-presto it worked again.

Just a suggestion :)
 
Fuse 33 and Fuse 11.

Both 10A

Fuse 11 feeds the motors, Fuse 33 feeds the levelling signal switch.

Peter
 
after changing the retaining clips one of the motors started to work. so I replaced the other with a second hand one which didn't work either. so I set the lights to what I thought was high enough without getting flashed. Was driving home yesterday and they were pointing very low so I turned the selector and watched them rise. Very odd but hey hoo its a disco.
 

Similar threads