Nodge68
Well-Known Member
Still doesn't look nice to get to
You can remove the fuse box, which will allow you to see the main harness, although not super easy to access.
You can remove the fuse box, which will allow you to see the main harness, although not super easy to access.
ivancrx
Well-Known Member
I am thinking of going direct to the edm, had a quick look but couldn’t see any pink cables, should be able to get a better look tomorrow
ivancrx
Well-Known Member
Well I have had yet another look today.
I have gone direct to the EDM in the engine and connected to the pink cable (Connector C0603) and to the pink cable at the OBD port and still no joy, none of the code readers will connect to the EDM.
I have power to the OBD Socket
I have 2 Earths to the OBD Socket
1 of the Pink cables read the ABS and Immobiliser
Just nothing reading from the EDM at all.
Could it be the EDM, if so it it easy to just swap with another or do other components need to be changed with it?
I have gone direct to the EDM in the engine and connected to the pink cable (Connector C0603) and to the pink cable at the OBD port and still no joy, none of the code readers will connect to the EDM.
I have power to the OBD Socket
I have 2 Earths to the OBD Socket
1 of the Pink cables read the ABS and Immobiliser
Just nothing reading from the EDM at all.
Could it be the EDM, if so it it easy to just swap with another or do other components need to be changed with it?
GrumpyGel
Well-Known Member
I'm not sure exactly, but the EDM and immobiliser ECU are coded together. That presumably means the transducers in the keys are coded. Not sure if the CCU is linked to them, if so the remotes are also coded.
You'd need to investigate.
