i was under the impression that if it didnt work it would just stall
speed didnt reach any number on dash as it was slow and didnt stall going uphill
hello being out today tried several hills all of diff steepness and the hill decent must be working as it doesnt just stall but no light on dash
i have looked on the rave CD and it says what wire the bulb is (pin17)
so i put a temp 12v to that wire to try and make the bulb come on and nothing... put my test light to the wire tho and it has power even when disconnected from the abs ecu it still has some power in the wire and no bulb
bulb does come on when ignition turned on tho
HDC works by abs pulse braking the car if it goes above a certain speed. Put yer Freelander in 1st gear and drive down a hill at 10mph then take yer foot off all pedals. If HDC is on and able to work you will feel the car slow down by using the abs and not just slowing because it's in gear still. If not, then avoid hitting whats in front of you. An eggsample of hdc working on mine:hello being out today tried several hills all of diff steepness and the hill decent must be working as it doesnt just stall but no light on dash...
hello today my switch arrived for the gearbox (had a wire handing in engine bay turns out the switch in gearbox was missing...
fitted switch today and the lights are still on TC/HDC
do i need to use diagnostic machine to turn the lights off or will they go off on there own
do i need to use diagnostic machine to turn the lights off or will they go off on there own
its not a sensor i fitted today its a switch on the gearbox.
i had a wire loose in the engine bay and i used rave to find out what the connector was and it was for a HTC switch on the gearbox my gearbox had a bung in it not another switch so i ordered a switch for it and then fitted that today
but my htc and tc lights are still on
They go off on their own.