Russell 1 · Feb 28, 2020

Will a Hawkeye allow you to do what is needed to sort out the air suspension on a 2005 l322 with Hitachi compressor and Jag engine? I'm asking because I also have a 2002 td5 disco and have read Hawkeye is best for that and i would like to only buy one computer if pos.

Nodge68 · Feb 28, 2020

I don't know about the Hawkeye, but the Gap Diagnostics IID will do everything you need on modern LRs.

backinblack · Feb 28, 2020

So will the Foxwell NT 510pro

wammers · Feb 28, 2020

RSW solutions All Comms III is what you need.

biketeacherdave · Feb 28, 2020

Yes the hawkeye will let you do that

Saint.V8 · Feb 28, 2020

Didnt think Hawkeye would do a recalibration!?

biketeacherdave · Feb 28, 2020

It did on my disco td5 and I'm sure ifv seen it in the setting on my l322 hawkeye will plug it in and check

Russell 1 · Feb 28, 2020

Ok thanks all

wammers · Feb 29, 2020

Saint.V8 said:
Didnt think Hawkeye would do a recalibration!?

People keep asking will the cheap shit diag do as much as the more expensive diag. The answer is no it won't.

Russell 1 · Feb 29, 2020

Hawkeye is the most expensive of that lot .
Can you suggest a computer that will calibrate suspension on a l322 and read/reset codes on a td5 disco?

wammers · Feb 29, 2020

Russell 1 said:
Hawkeye is the most expensive of that lot .
Can you suggest a computer that will calibrate suspension on a l322 and read/reset codes on a td5 disco?

https://www.rswsolutions.com/index.php/range-rover-mkiii

Saint.V8 · Feb 29, 2020

Yep, but won't do his Td5

biketeacherdave · Mar 2, 2020

So to follow this up a couple of pic of my hawkeye plugged into my L322.
Ant I didn't go into the setting but I'm sure it allows me to adjust and reset air suspension same as my d2 hawkeye did.

Nodge68 · Mar 3, 2020

Russell 1 said:
Can you suggest a computer that will calibrate suspension on a l322

Yes
https://www.gap-diagnostic.com/products/iidtool/

Russell 1 said:
read/reset codes on a td5 disco?

But the IID doesn't do old LRs.

wammers · Mar 3, 2020

When Hawkeye was introduced for the P38 it was as useful as tits on a Mars bar. Loads of fault codes but no explanation of what they meant. It seems to have improved over time. But it really needed to.

Russell 1 · Mar 4, 2020

Ok thanks biketeacherdave, I think I will most likely buy the Hawkeye when the time comes.

Russell 1 · Mar 22, 2020

I'm still no further on with this. The Hawkeye that's currently available looks different to the one above. Also I read a pdf listing it's abilities and programming? Is not ticked. I searched for foxwell nt510pro but it appears to no longer be available. 520 and 530 are.?

kds · Mar 23, 2020

Foxwell nt 530 has suspension options including, transport mode, deflate/inflate each corner and adjust heights (couple of others cant think off without pluging it in) I would go for that pretty sure it will do what you want.

kds · Mar 23, 2020

Any good @Russell 1 ?

and I`ll be amazed if this works

Russell 1 · Mar 23, 2020

I've not done it before so I'm not really sure what I'm looking for but I want to be able to calibrate suspension/ reset height sensors.

Active Member

Well-Known Member

Well-Known Member

No longer with us, RIP

Well-Known Member

Dyed-in-the-wool 100% RR Junkie

Well-Known Member

Active Member

No longer with us, RIP

Active Member

No longer with us, RIP

Dyed-in-the-wool 100% RR Junkie

Well-Known Member

Well-Known Member

No longer with us, RIP

Active Member

Active Member

Well-Known Member

Well-Known Member

Attachments

Active Member

Similar threads