Gray21

Gray21

New Member
Hi all,

Ive got an early 1994 300tdi disco which ive bought an egr blanking kit for. Had a look under the bonnet but i dont think ive got an egr. Does anyone know if they didnt have egr's on early 300's?

Thanks
 
So you went out and bought the blanking kit before having a look to see if you had an egr? Not clever.
 
I would check to see if there is a bit next to your turbo that looks like the blanking plate you have bought if not take a pic of your engine and someoen will tell you
 
Gray21 said:
Thanks. Before i go ahead and get a de-cat pipe next how do i check to see if that has already been done?
Click to expand...

Have a look at the pic of the front exhaust section in this link, the bulge near the bend is the cat.
 
palace said:
I would check to see if there is a bit next to your turbo that looks like the blanking plate you have bought if not take a pic of your engine and someoen will tell you
Click to expand...

SS102625.jpg


This is what it looks like?
 
Heh, that lozenge plate with two bolts is the de-egr that's already there .. ;)
 
If you want to replace the cat for a non-cat exhaust cheaply, my 300Tdi Disco has a Defender front exhaust pipe . £20 instead of £50+ for the Disco flexy pipe ..;)
 
Paul D said:
If you want to replace the cat for a non-cat exhaust cheaply, my 300Tdi Disco has a Defender front exhaust pipe . £20 instead of £50+ for the Disco flexy pipe ..;)
Click to expand...

does that fit direct to the centre pipe without modification?
 
You must log in or register to reply here.

Similar threads

P7XES
Disco 3 oil pump cover
Replies
5
Views
484
Rangieman123
Rangieman123
Suffering Sod
300tdi EGR Blanked?
Replies
1
Views
476
lynall
L
C
Dash removal - now it won’t start…
Replies
5
Views
475
shaynecm
S
P
Returning Zoner , asking about early Freelander filters.
Replies
3
Views
513
brianp38dse
brianp38dse
Y
Air suspension fault , will not operate via switch, flags error
Replies
1
Views
470
ydouaskm8
Y