fett

Well-Known Member
To all of us burblers :D

I hope my year will be full of 4.4 v8 roar!

Whats your v8 plans?
 
To all of us burblers :D

I hope my year will be full of 4.4 v8 roar!

Whats your v8 plans?

Happy New Year!

I'm planning to strip and rebuild both my V8's - they both need rear crank seals so I might as well look at everything while I'm in there!
 
Happy new year............my V8 plan is to keep putting lots of fuel in and just going for a drive for the hell of it! :D
 
tell me about the 2nd one kev :)

joe, you have your work cut out with 3 :D


It's not the engines that are the issue at the mo...it's that bloody RRC bob' that keeps blowing diffs....I should probably dip my hand in my pocket n get recon parts rather than use £20 end of life ebay specials I guess :eek::rolleyes:
 
yeah, or get some toyota axels or summit, they dont break and they have lockers too
 
My plan is:

Not v8 related, pretty sure I've got that covered last year unless it blows up in the meantime!! :eek:

Kinda fancy a new winch, kinda fancy refurbing my front axle cos its a bit shabby cosmetically, kinda could do with making a proper job of my front arches that I half bodged a few years ago cos I didn't know how thorough i needed to be, but I think I'll be putting that off forever if possible!

Oooooh I would like a bigger alternator but its not so easy for a V belt engine due to availability.

Aaaaaaand I would like to swap for a decent R380 gearbox, aaaaand I'd like to rebuild my other 3.5 (and of course I'd like a stroker kit for it) but did I mention money doesn't grow on trees?! :eek:

Cheers boys!
 
Classic Kev

Try liquid inteligence it works and will save a rebuild it replenishes the marerial in the seals.

Should be on the web.
pete
 
Classic Kev

Try liquid inteligence it works and will save a rebuild it replenishes the marerial in the seals.

Should be on the web.
pete


I'll take a gander cheers but think the 4.2 will need opening up as I don't know its history. I know it runs but think I will give it head gaskets and check condition of cam and followers etc so might as well tear it down and do it all properly.
 

Similar threads