tlc22

New Member
Having stuck in a new set of front pads, the Handbrake Warning light is on. I gather this is also a double for low fluid level as well, as the fluid level will have risen with the new pads, is there anything else I should check
 
Sounds daft but is there a pressure build in the oil reservoir ?

I am not much good with technical things!

Saying that isn't handbrake linked to rear brakes? So could it be a stuck micro switch
 
Sorted,

Took the top off the fluid reservoir, stirred up the fluid a bit, this must have released the level switch which had stuck from the fluid being pushed back as the new pads were fitted
 

Similar threads