Sorry it’s a defender 90 300tdi , previous owner installed them , I’ve had a new dip dim relay put in
Depending on the age/wiring - maybe linking the pins, maybe just removing it.
If it's an anodised black heatsink like assembly, you can just remove it. That resolved this issue on mine when I installed LED headllights.
If it's (I think) an orange relay looking thing - then remove and bridge the pins as above.
If it's an anodised black heatsink like assembly, you can just remove it. That resolved this issue on mine when I installed LED headllights.
If it's (I think) an orange relay looking thing - then remove and bridge the pins as above.
I should also state that the halo lights work fine with ignition on and the switch set to side lights it’s when I turn the engine on that the headlights then come on
I’ve linked pin 2 and 8 now relay buzzes?
dag019
Well-Known Member
You can buy special bypass relays, you can make your own bypass relay (which I have done) by using this guide: link or you can just use a length of wire with some spades on it depends how tidy a solution you want and how much time/money you have. But it definitely sounds like a sun dip issue. No idea who thought it was a good idea. Defintily much better to have them on or off. Don’t see the value of a dim setting.
