Hi. I'm hoping that someone on here can advise me (please!). I have a 2007 FL2 2.2 diesel, works fine in 2 wheel drive (when terrain selection options are switched off), but today when I needed the 4 wheel drive (because of the snow), I discovered the 4 wheel drive doesn't work! :( I jacked the car up and put it on axle stands, so all 4 wheels were off the ground. I started the car and selected 'Snow' setting, put it into 1st gear and let the clutch out. The front wheels turned as normal, the prop shaft turned, as normal, but nothing from the back wheels! I assume that the Haldex Unit is to blame? I don't mind so much, because I can pick up a used replacement for around £350, but I don't want to spend that money if it's not going to make any difference. Any comments will be most welcome. Thanks :)
 
Hi. I'm hoping that someone on here can advise me (please!). I have a 2007 FL2 2.2 diesel, works fine in 2 wheel drive (when terrain selection options are switched off), but today when I needed the 4 wheel drive (because of the snow), I discovered the 4 wheel drive doesn't work! :( I jacked the car up and put it on axle stands, so all 4 wheels were off the ground. I started the car and selected 'Snow' setting, put it into 1st gear and let the clutch out. The front wheels turned as normal, the prop shaft turned, as normal, but nothing from the back wheels! I assume that the Haldex Unit is to blame? I don't mind so much, because I can pick up a used replacement for around £350, but I don't want to spend that money if it's not going to make any difference. Any comments will be most welcome. Thanks :)
You will probably get some advice soon. But you won’t like it.
 
Hi. I'm hoping that someone on here can advise me (please!). I have a 2007 FL2 2.2 diesel, works fine in 2 wheel drive (when terrain selection options are switched off), but today when I needed the 4 wheel drive (because of the snow), I discovered the 4 wheel drive doesn't work! :( I jacked the car up and put it on axle stands, so all 4 wheels were off the ground. I started the car and selected 'Snow' setting, put it into 1st gear and let the clutch out. The front wheels turned as normal, the prop shaft turned, as normal, but nothing from the back wheels! I assume that the Haldex Unit is to blame? I don't mind so much, because I can pick up a used replacement for around £350, but I don't want to spend that money if it's not going to make any difference. Any comments will be most welcome. Thanks :)
Welcome to LZ!

I would advise using the link I have supplied below to post in the Freelander section.

https://www.landyzone.co.uk/forum/land-rover-freelander.9/
 

Similar threads