Although we have a few more important matters, we've started thinking about the interior... Outside it's painted Oslo Blue, inside Lightstone leather with blue piping. All fine so far, until you get to the "wood" trim.
It's green, which we were told was "rare and desirable". It may be rare, but I'm not sure it "goes" with the blue. And it's also fading in places - not sure it comes out in the photos, but either end of the dash strips are very faded.
I quite like the "burr maple", but that's also rare, I believe?
So I guess the options are:
a) Collect all the walnut parts to replace the green bits, decide if the steering wheel (etc) would be over-wooding it and swap it all over.
b) Find an aftermarket kit which looks as good (or better?) than the factory bits, and fit that.
Suggestions welcome!
Rich
It's green, which we were told was "rare and desirable". It may be rare, but I'm not sure it "goes" with the blue. And it's also fading in places - not sure it comes out in the photos, but either end of the dash strips are very faded.
I quite like the "burr maple", but that's also rare, I believe?
So I guess the options are:
a) Collect all the walnut parts to replace the green bits, decide if the steering wheel (etc) would be over-wooding it and swap it all over.
b) Find an aftermarket kit which looks as good (or better?) than the factory bits, and fit that.
Suggestions welcome!
Rich